全國咨詢熱線
生產能力：800/1200 kg/h 電機功率：1.5 kW 切菜規格：800/1200 kg/h 尺寸：1300×600×1050 mm/1800×710×103
切片機的作業原理也很簡單，是利用冷卻的滾筒對會冷凝結晶的物料進行結片，再經過鋒利的刀片刮片，然后把片按照相應的大小來進行鏟出，這樣可以很好的來進行生產或者是進行相應的活動。
The operation principle of the slicer is also very simple. It is to use the cooled drum to flake the materials that will condense and crystallize, then scrape them with a sharp blade, and then Shovel them out according to the corresponding size. In this way, it can be well used for production or corresponding activities.
此設備在我們生活中的應用是很多的，而它的種類也有很多，冷凝結晶也是有切片機的，用的是轉鼓式的切片機。這個切片機主要是由滾筒、機架、刀片、傳動部分、機殼等一些組成的，利用滾筒運轉，起到一個飛輪的作用，然后通過刀片鏟出不規則片，可以很快的進行切片了。
This equipment has many applications in our life, and there are many kinds of it. There is also a slicer for condensation crystallization, and a drum slicer is used. This slicer is mainly composed of drum, frame, blade, transmission part, casing, etc. it uses the drum to operate and play the role of a flywheel, and then shovel irregular pieces through the blade to slice quickly.
要說設備配套的刀片，還是要是具體切的是什么物質，因?yàn)椴煌奈镔|(zhì)所對應的刀片和切片機都是不一樣的。刀片材質有：銅、不銹鋼、錳鋼、四氟乙烯、膠木、鋼帶，針對不同物質的硬度和化學特性來選擇各個適合自己的刀片。
To say the blade matched with the equipment, or what material is cut, because the blade and slicer corresponding to different materials are different. The blade materials include: copper, stainless steel, manganese steel, tetrafluoroethylene, bakelite and steel strip. Each suitable blade is selected according to the hardness and chemical characteristics of different substances.
切片機的外包裝是不銹鋼的，所以我們?cè)谌粘Ｊ褂玫臅r(shí)候，應當特注意不要使用過尖或者是過硬的東西碰到其表面，以免劃傷。如果在使用一段時間之后，需要對切片機產品進行清洗的時候，工作人員應當同時卸上下的固定的螺絲，以免在拆掉一個螺絲的時候，發生危險，或者是損壞設備。
The outer package of the slicer is stainless steel, so we should pay special attention not to use too sharp or hard things to touch its surface in order to avoid scratching. If it is necessary to clean the slicer products after a period of use, the staff should remove the fixed screws at the same time, so as to avoid danger or damage to the equipment when removing one screw.