全國咨詢熱線
現在市面上各式各樣的機械設備變得越來越多，這其中也不乏一些精度高的機械設備，它們的出現是科技進步的印證，切片機是現在常見的一種設備，在使用它的時候要按時對其進行潤滑。
Nowadays, there are more and more kinds of mechanical equipment on the market, among which there are some high-precision mechanical equipment. Their appearance is the confirmation of scientific and technological progress. Slicer is a common kind of equipment now, and it should be lubricated on time when using it.
切片機中需要潤滑的部位有不少，采用的潤滑介質也是有區別的，比如說它的離合器、彈簧、鏈輪張緊裝置、往返運動部位導軸、開合機構等部位的潤滑加黃油。
There are many parts in slicer that need to be lubricated, and the lubricating medium used is also different, for example, the lubrication of its clutch, spring, sprocket tensioning device, back and forth moving parts, guide shaft, opening and closing mechanism, etc.
而切片機中的位塊凸輪裝置、主傳動室潤滑要加機油，且半年換1次機油，由視窗油的清澈程度決定；角度分割器潤滑每半年1次；空壓機潤滑，三個月加1次。
The position block cam device and the main transmission chamber of the slicer need to be lubricated with oil, and the oil should be changed once a half year, which is determined by the clarity of the window oil; The angle divider is lubricated once every half a year; Air compressor lubrication, add once every three months.
除了潤滑之外，在使用它的時候，還要留意防塵和清潔、電氣方面的故障。除了這些以外，它的換油也是很重要的，要保障平臺的四角度與上凈平臺之間的間隔，只有保持正確的間隔，才能使機器正常的運轉。
In addition to lubrication, in the use of it, but also pay attention to dust and cleaning, electrical failure. In addition to these, its oil change is also very important. To ensure the spacing between the four angles of the platform and the upper clean platform, only by maintaining the correct spacing can the machine operate normally.
在切片機切片時，還要注意不要將大量的廢紙邊、紙毛弄進鏈條傳動部位、模切部動平臺及一些其它的旋轉部位，以免造成運轉故障，損害切片機，如果在日常使用它的時候不能較好的保養機器，不但會額外的增加維修機器的開支，對機器的損害也很大。
In the slicer slicing, but also pay attention not to get a lot of waste paper edge, paper wool into the chain drive parts, die-cutting part moving platform and some other rotating parts, in order to avoid causing operation failure, damage slicer, if in daily use it can not better maintenance machine, not only will increase the cost of maintenance machine, the damage to the machine is also great.
