全國咨詢熱線
生產能力：800/1200 kg/h 電機功率：1.5 kW 切菜規格：800/1200 kg/h 尺寸：1300×600×1050 mm/1800×710×103
凍肉切片機能將凍肉直接進行切割，加工過程中不需求解凍，即省去了凍肉的緩化時刻，又避免了因緩化造成的肉質污染，多用于肉食品加工企業。今天，來了解凍肉切片機是如何操作的吧！
Frozen meat slicer can cut frozen meat directly without thawing during processing, which saves the time of thawing of frozen meat and avoids meat pollution caused by thawing. It is mostly used in meat processing enterprises. Today, let's learn how to operate the frozen meat slicer!
1、要打開電源指示燈下方的開關。
1. First, turn on the switch under the power indicator.
2、由于只有把氣缸護罩和前門關好機器才可以正常發動，所以我們?cè)谑褂弥靶柽M(jìn)行檢查。
2. Since the machine can only be started normally when the cylinder cover and front door are closed, we need to check before use.
3、按下發動按鈕，切割滾筒開端旋轉并接通一切電器和氣動控制。
3. Press the start button, the cutting drum starts to rotate and turn on all electrical and pneumatic control.
4、將把需求加工的凍肉平整面向下放進料道內，然后按下進料按鈕，推料器開端推著肉塊向前移動，一起進行切割。
4. Put the flat surface of frozen meat to be processed down into the feeding channel, then press the feeding button, and the pusher starts to push the meat forward to cut together.
5、根據自身?xiàng)l件調整計時器，推料器可自動推料及退回。
5. Adjust the timer according to its own conditions, the pusher can push and return automatically.
6、推料器的速度可用坐落機器后部的節流閥2調整，但是進給的速度不能過快。
6. The speed of the pusher can be adjusted by the throttle valve 2 located at the rear of the machine, but the feeding speed cannot be too fast.
7、要徹 底中止機器可按下中止按鈕，機器將徹 底中止。機器中止后不要立即打開頂蓋及前門，應等切割滾筒徹 底中止后才能打開。
7. To stop the machine completely, press the stop button and the machine will stop completely. Do not open the top cover and front door immediately after the machine is stopped, but wait until the cutting roller is completely stopped.
8、使用前，先查看機器各部分有無缺損，然后把凍肉絞肉機清洗干凈。
8. Before use, check whether there is any defect in each part of the machine, and then clean the frozen meat grinder.
9、接通電源，若電源燈亮，則說明接線正確，注意接地。
9. Turn on the power. If the power light is on, it means that the wiring is correct. Pay attention to the grounding.
10、開啟機器，將切割成小塊的凍肉放入凍肉絞肉機的料箱內，凍肉塊由送料絞龍送絞刀處絞切，當肉顆粒小于孔板的孔徑時，即可從孔板處出料。
10. Start the machine, put the frozen meat cut into small pieces into the material box of the frozen meat grinder. The frozen meat pieces are sent to the cutter by the feeding auger for cutting. When the meat particles are smaller than the hole diameter of the orifice plate, they can be discharged from the orifice plate.
11、嚴禁將帶有骨頭或其他雜物的肉塊放入凍肉絞肉機內，以防損壞設備；不能將手伸進凍肉絞肉機中，以防發生意外。
11. It is strictly forbidden to put meat pieces with bones or other sundries into the frozen meat grinder to prevent damage to the equipment; Do not put your hand into the frozen meat grinder to prevent accidents.
12、使用后應徹 底清洗凍肉絞肉機的各個部件。
12. All parts of the frozen meat grinder should be cleaned thoroughly after use.